- Model NO.: EM6241
- Processing Accessory: Centre CNC Lathe
- Tool Holder: Single-tool Holder CNC Lathe
- Controlling Mode: Artificial
- Setting Mode: Floor-type
- Certification: SGS, CE, ISO 9001
- Trademark: Effort
- Origin: Jiangsu
- Type: Horizontal Lathe
- Guide Rail: Inclined Guide Rail
- Power Source: Electric
- Automatic Grade: Manual
- Precision: Normal Precision
- Condition: New
- Specification: CE, SGS, ISO9001
- HS Code: 8458990000
- Before operating the machine, remove tie, rings, watches, other jewelry, and roll up sleeves above the elbows. Remove all loose clothing and confine long hair. Do not wear gloves.
- Keep the floor around the machine clean and free of scrap material, oil and grease.
- Keep machine guards in place at all times when the machine is in use. If removed for maintenance purposes, use extreme caution and replace the guards immediately.
- Do not over reach. Maintain a balanced stance at all times so that you do not fall or lean against blades or other moving parts.
- Make all machine adjustments or maintenance with the machine unplugged from the power source.
- Use the right tool. Don't force a tool or attachment to do a job which it was not designed for.
- Replace warning labels if they become obscured or removed.
- Make certain the main power switch is in the OFF position before connecting the machine to the power supply.
Three Jaw Chuck
Taper Turning Attachment
Drill Chuck+Drill Arbor
|Max.swing over bed||Φ410mm|
|Max.swing over cross slide||Φ255mm|
|Max. swing over gap||Φ580mm|
|Max.length of workpiece||1000mm/1500mm|
|Length of gap||250mm|
|Max.section of tool||20mm×20mm|
|Max.travel of cross slide||210mm|
|Max.travel of compound rest||140mm|
|Width of bed||250mm|
|Taper of spindle bore||M.T.#6|
|Range of spindle speed||16 changes 45-1800r/min|
|Inch threads range||45kinds 2-72 T.P.I.|
|Metric threads range||39kinds 0.2-14mm|
|Module pitches range||18kinds: 0.3-3.5M.P.|
|Diametrical pitches range||21kinds:8-44D.P.|
|Dia. of tailstock sleeve||60mm(2 5/16")|
|Travel of tailstock sleeve||120mm(4 3/4")|
|Morse taper of tailstock sleeve||M.T.#4|
|Power of main motor||2.2/3.3kw(optional 3/4.5kw)|
|Power of coolant pump||4P, 3PH,90w|
|N.W./G.W.||1550/1760 kg 1750/1850kg|